How to Increase Your Bench Press: 10 Proven Tips

Almost everyone's bench press shoots up in the first few months, then stalls. Getting it moving again usually isn't about a secret exercise. It comes down to a tighter set-up, smarter loading, a little more practice and fixing the one spot where the bar keeps slowing down. Here's how to do each.

Quick answerTo increase your bench press: tighten your set-up (shoulder blades back, feet planted, slight arch), bench 2–3 times a week, add weight or reps gradually, train your triceps, shoulders and upper back, and target your sticking point with paused or close-grip work. Push-ups can help too: in one study, push-ups loaded to a similar effort produced strength gains similar to the bench press.

Start with your current max

You can't plan progress without a starting point. Rather than testing a risky single, take a hard set of 3–8 reps and put it into the bench press calculator. It estimates your one rep max and builds a percentage chart, which is what the plan below runs on. To see how your number compares with others at your bodyweight and age, check the average bench press by age and weight.

10 ways to increase your bench press

1. Build a tight set-up

Pull your shoulder blades back and down before you unrack, and keep them pinned for the whole set. That gives you a stable platform and shortens the distance the bar travels. Plant your feet, keep your glutes on the bench and allow a natural arch in your upper back.

2. Use your legs

Leg drive isn't a lift with your legs; it's pushing your feet into the floor so your upper back stays wedged into the bench. Set your feet before you unrack and keep that pressure through every rep.

3. Find your grip width

Most lifters are strongest with a grip slightly wider than shoulder width, forearms roughly vertical at the bottom. Too narrow shifts the work to your triceps; too wide can bother your shoulders. Test a few widths with moderate weight and keep the one where the bar moves best.

4. Bench more often

The bench press is a skill as well as a strength test. Two or three sessions a week, one heavier and one or two lighter, give you more practice without wrecking your shoulders. Most people who bench once a week progress faster when they add a second day.

5. Progress gradually

Progressive overload is the engine. Add 1–2.5 kg (2.5–5 lb) to the bar when you hit all your target reps, or add a rep at the same weight first. Small jumps keep you progressing for months; big jumps stall you in weeks. Fractional plates help a lot on the bench.

6. Train across rep ranges

Heavy sets of 2–5 reps build maximal strength; sets of 6–12 build the muscle that strength comes from. Mix both each week. The 1RM percentage chart turns your max into exact weights for each range, and the bench press pyramid calculator (see reverse pyramid training) builds a session that covers several rep ranges at once.

7. Strengthen your triceps, shoulders and upper back

Your chest gets the bar moving, but triceps finish the rep, front shoulders help through the middle, and your upper back holds everything in place. Close-grip bench press, dips, overhead press, incline press, rows and face pulls cover all of them.

8. Pause your reps

Pausing the bar on your chest for one to two seconds removes the bounce and builds strength in the hardest position. It also makes your touch-and-go bench feel easier. Use about 5–10% less weight than your normal sets.

9. Use dumbbells and variations

Dumbbell presses fix side-to-side imbalances and work through a longer range of motion. Incline press builds the upper chest and shoulders. Rotate one or two variations every few weeks. If you train mostly with dumbbells, the dumbbell to barbell converter shows what your numbers mean on the bar.

10. Recover and eat enough

Strength is built between sessions. Aim for 7–9 hours of sleep, enough total calories, and roughly 1.6 g of protein per kg of bodyweight per day, the level above which a large meta-analysis found little extra benefit for muscle gain. Lighter "deload" weeks every 4–8 weeks let your joints and nervous system catch up.

Fix your sticking point

Film a heavy set from the side. Where the bar slows down tells you what to train.

Where does your bench press stall?Match your sticking point to the exercises that fix it. Columns: Sticking point, Likely weak link, Add this. Off the chest, Chest, bottom strength, Paused bench, wider grip | Mid-range, Front shoulders, speed, Spoto press, incline press | Near lockout, Triceps, Close-grip bench, dips | Bar drifts or wobbles, Upper back, set-up, Rows, face pulls, practice | Fades after rep 3, Work capacity, More volume, push-upsWhere does your bench press stall?Match your sticking point to the exercises that fix itSticking pointLikely weak linkAdd thisOff the chestChest, bottom strengthPaused bench, wider gripMid-rangeFront shoulders, speedSpoto press, incline pressNear lockoutTricepsClose-grip bench, dipsBar drifts or wobblesUpper back, set-upRows, face pulls, practiceFades after rep 3Work capacityMore volume, push-upsGeneral guide; film a heavy set from the side to see where the bar slows.OneRepMax Calculator Lab
Find where the bar slows down, then add one or two of the matching exercises after your main bench work.

Do push-ups increase bench press?

Yes, if they're hard enough. In a 2015 study by Calatayud and colleagues, trained university students did either a 6-rep-max bench press or push-ups made harder with elastic bands, so both exercises produced similar muscle activity. After five weeks, both groups gained similar strength. The takeaway: push-ups build bench press strength when the load is comparable.

The catch is load. A regular push-up only moves about 64% of your bodyweight (see how much of your body weight is a push-up), so once you can do 20 or more, they turn into endurance work. To make them count:

  • Elevate your feet, wear a weighted vest or use bands so you reach failure within about 6–15 reps.
  • Use them as a second pressing exercise after bench, or as a bench substitute when you can't get to a gym.
  • Estimate what your push-ups mean on the bar with the push-up to bench press calculator.

8-week bench press plan

This simple plan runs on two bench sessions a week. Work out the weights from your estimated max and round to the nearest plate.

8-week bench press planTwo bench sessions a week, loads as % of your estimated 1RM. Columns: Week, Day 1 (heavy), Day 2 (volume). 1, 5 × 5 @ 75%, 4 × 8 @ 65% | 2, 5 × 4 @ 78%, 4 × 8 @ 67.5% | 3, 5 × 3 @ 82%, 4 × 7 @ 70% | 4 (deload), 3 × 3 @ 70%, 3 × 6 @ 60% | 5, 5 × 4 @ 80%, 4 × 8 @ 70% | 6, 5 × 3 @ 84%, 4 × 7 @ 72% | 7, 4 × 2 @ 88%, 4 × 6 @ 72.5% | 8, Work up to 1 × 1–2 @ RPE 9, Rest, then re-estimate8-week bench press planTwo bench sessions a week, loads as % of your estimated 1RMWeekDay 1 (heavy)Day 2 (volume)15 × 5 @ 75%4 × 8 @ 65%25 × 4 @ 78%4 × 8 @ 67.5%35 × 3 @ 82%4 × 7 @ 70%4 (deload)3 × 3 @ 70%3 × 6 @ 60%55 × 4 @ 80%4 × 8 @ 70%65 × 3 @ 84%4 × 7 @ 72%74 × 2 @ 88%4 × 6 @ 72.5%8Work up to 1 × 1–2 @ RPE 9Rest, then re-estimateUse your estimated 1RM; adjust if a session is far harder or easier than planned.OneRepMax Calculator Lab
Week 4 is a lighter deload. In week 8, work up to a heavy single or double and re-estimate your max.
  • After the main sets on each day, add 2–3 accessories from the sticking-point table, for 3 sets of 8–12 reps.
  • If a session feels much harder than planned, drop the weight 5% or rate your sets with the RPE chart and aim for RPE 7–8.
  • At the end, enter your heaviest set into the bench press calculator, then start again with the new max.

How to warm up for a heavy bench

Climb to your working weight in 4–5 sets while dropping the reps, for example the empty bar for 10, then about 45%, 60%, 75% and 85–90% of your work-set weight for 6, 4, 2 and 1 reps. For the full method and examples for every lift, see warm-up sets before a heavy lift.

How long does it take to increase your bench?

  • First 3–6 months: fast gains. Many beginners add 20–40 kg (45–90 lb) as their technique and coordination improve.
  • Years 1–2: progress slows to a few kilograms per training block. This is where planning and accessories start to matter.
  • After that: gains come over months and years. A 2.5 kg (5 lb) PR is a real achievement.

Whatever your stage, track your estimated max every block. Seeing the trend is more motivating than chasing a single test day.

Mistakes that stall progress

  • Maxing out every week. Testing isn't training. Save heavy singles for the end of a block.
  • Bouncing the bar. It inflates your numbers and hides weakness off the chest.
  • Losing your upper-back position mid-set. If your shoulders roll forward, the bar path and your strength both suffer.
  • Only training chest. Weak triceps or upper back will cap your bench.
  • Changing programs every two weeks. Give any sensible plan at least six to eight weeks.

Frequently asked questions

How can I increase my bench press fast?

The quickest gains usually come from a tighter set-up (shoulder blades back, feet planted), benching two or three times a week and adding small amounts of weight each session. Beginners can add weight almost every session for the first few months.

How often should I bench to increase my max?

Two to three times a week works well for most people, with one heavier session and one or two lighter ones.

Do push-ups increase bench press?

Yes, when they are challenging. A 2015 study found that push-ups loaded with elastic bands to a similar effort as a 6-rep-max bench press produced similar strength gains over five weeks.

How much can I add to my bench press in a month?

Beginners can often add 5 to 10 kg (10 to 20 lb) in a month. Intermediate lifters might add 2.5 to 5 kg (5 to 10 lb) over a whole training block, and advanced lifters less.

What muscles help increase bench press?

The chest, front shoulders and triceps do the pressing, while the upper back and lats provide a stable base. Strengthening all of them helps your bench.

Why is my bench press not increasing?

Common reasons are maxing out too often, jumps in weight that are too big, a loose set-up, too little volume, weak triceps or upper back, and poor sleep or nutrition.

Should I bench heavy or light to get stronger?

Both. Heavy sets of 2 to 5 reps build maximal strength, while sets of 6 to 12 build the muscle that supports it. Most good plans use both each week.

References

  1. Calatayud J, Borreani S, Colado JC, et al. Bench press and push-up at comparable levels of muscle activity results in similar strength gains. J Strength Cond Res. 2015;29(1):246–253.
  2. Morton RW, Murphy KT, McKellar SR, et al. A systematic review, meta-analysis and meta-regression of the effect of protein supplementation on resistance training-induced gains in muscle mass and strength in healthy adults. Br J Sports Med. 2018;52(6):376–384.