Warm-up Sets Before a Heavy Lift: How Many & How Heavy

Good warm-up sets do two jobs: they get your body ready for heavy weight, and they let you rehearse the exact movement you're about to load. Too few and the first heavy set feels awful; too many and you waste energy. Here's a simple system that works for almost any lift.

Quick answerBefore a heavy set, do 3–5 warm-up sets that climb in weight while the reps drop: for example the empty bar for 8–10, then about 40–50% × 5–8, 60–65% × 3–5, 75–80% × 2–3 and 85–90% × 1 of your working weight. Rest briefly early on and up to 2–3 minutes before your first work set. Warm-ups should feel easy; they're practice, not training.

Why warm-up sets matter

  • Practice: each warm-up set rehearses your set-up, bar path and bracing with a weight that's easy to control.
  • Readiness: gradually heavier sets raise muscle temperature and let your joints and nervous system adjust to the load.
  • A check-in: how the warm-ups feel tells you whether today is a day to push or hold back.

General warm-up first

Start with 5–10 minutes of light activity that raises your heart rate, such as cycling, rowing or brisk walking, followed by a few mobility drills for the joints you're about to load: hips and ankles before squats, shoulders and upper back before pressing. Keep it short; the specific warm-up sets that follow do most of the work.

A simple warm-up set system

Work from your first working-set weight, not your max. Climb in roughly even steps, dropping the reps as the weight rises so you arrive fresh.

Warm-up sets before a heavy liftPercentages of your first working-set weight. Columns: Step, Load, Reps, Rest after. 1. Empty bar, Bar only, 8–10, As needed | 2. Light, ≈ 40–50%, 5–8, ≈ 1 min | 3. Moderate, ≈ 60–65%, 3–5, ≈ 1–2 min | 4. Heavy, ≈ 75–80%, 2–3, ≈ 2 min | 5. Near work, ≈ 85–90%, 1, 2–3 min | Working sets, 100%, As planned, As plannedWarm-up sets before a heavy liftPercentages of your first working-set weightStepLoadRepsRest after1. Empty barBar only8–10As needed2. Light≈ 40–50%5–8≈ 1 min3. Moderate≈ 60–65%3–5≈ 1–2 min4. Heavy≈ 75–80%2–3≈ 2 min5. Near work≈ 85–90%12–3 minWorking sets100%As plannedAs plannedFewer steps for light days and small lifts; more for very heavy lifts.OneRepMax Calculator Lab
A five-step warm-up that works for most barbell lifts.

To get exact numbers, take your working weight and multiply it by each percentage. If you plan your training from a max, the 1RM percentage chart gives every percentage in one table, already rounded to real plates.

Examples for bench, squat and deadlift

Example: warming up for 100 kg × 5 on benchEach warm-up set gets heavier while the reps drop. Empty bar × 10: 20 kg; × 6: 45 kg; × 4: 62.5 kg; × 2: 77.5 kg; × 1: 87.5 kg; Work sets × 5: 100 kgExample: warming up for 100 kg × 5 on benchEach warm-up set gets heavier while the reps dropEmpty bar × 1020 kg× 645 kg× 462.5 kg× 277.5 kg× 187.5 kgWork sets × 5100 kgWeights rounded to the nearest 2.5 kgOneRepMax Calculator Lab
A bench press warm-up for working sets of 100 kg × 5.
Lift and work setsWarm-up sets
Bench press, 100 kg × 520 × 10, 45 × 6, 62.5 × 4, 77.5 × 2, 87.5 × 1
Squat, 140 kg × 520 × 10, 60 × 6, 90 × 4, 110 × 2, 125 × 1
Deadlift, 180 kg × 360 × 8, 100 × 5, 130 × 3, 150 × 2, 165 × 1
Overhead press, 60 kg × 520 × 10, 30 × 5, 40 × 3, 50 × 1
Bench press, 225 lb × 545 × 10, 95 × 6, 135 × 4, 175 × 2, 200 × 1

For the deadlift, start with plates already on the bar; a straight bar on the floor without plates sits too low to rehearse your starting position.

How many warm-up sets do you need?

  • Light day or lighter weights: 2–3 sets.
  • Heavy working sets: 4–5 sets.
  • Very heavy singles or a max test: 5–7 sets with smaller jumps near the top.
  • Second and later exercises: usually 1–2 warm-up sets, since you're already warm.
  • Stronger lifters need more steps, because the distance from the empty bar to their working weight is bigger.

Warm-ups for different rep ranges

  • Heavy sets of 1–5: use the full five-step system; the jump from your last warm-up to your work weight should be small, around 10%.
  • Moderate sets of 6–10: three or four steps are enough, for example the bar, 50%, 70% and 85%.
  • Light, high-rep sets of 12+: one or two warm-up sets, or simply start with a lighter first set.

Using your warm-ups to adjust the day

Warm-ups are a free readiness test. If your 85–90% single moves fast and feels light, it's a good day to hit your planned weights or slightly more. If it feels much heavier than usual, drop your working weight by 5–10% or rate your sets with the RPE chart and stop at RPE 7–8. Trying to force the plan on a bad day is how missed reps and tweaks happen.

Do accessory exercises need warm-up sets?

Usually just one. After your main lift you're already warm, so a single lighter set of an accessory exercise, about 50–60% of your working weight for 8–10 reps, is enough to groove the movement before your working sets.

Warming up for a 1RM test

If you do test a true max, the National Strength and Conditioning Association (NSCA) describes a standard protocol:

  1. A light set of 5–10 reps at roughly 40–60% of your estimated max, then about 1 minute of rest.
  2. A set of 3–5 reps after adding about 5–10% (upper body) or 10–20% (lower body), then about 2 minutes of rest.
  3. A near-maximal set of 2–3 reps after another similar increase, then 2–4 minutes of rest.
  4. Single attempts, adding or removing small amounts each time with 2–4 minutes of rest, until you find the heaviest weight you can lift with good technique, ideally within 3–5 attempts.

You don't need a true max to train well. A hard set of 3–6 reps in the one rep max calculator gives you a reliable estimate with far less risk. If you do test, use a spotter or safety bars.

A 10–15 minute warm-up, start to finish

MinutesWhat to do
0–5Light cardio: bike, rower or brisk walk
5–8Mobility for the lift: e.g. hip openers and ankle rocks before squats, band pull-aparts before bench
8–15Warm-up sets: empty bar, then 3–4 climbing sets with falling reps
15+First working set after 2–3 minutes' rest

Ten to fifteen minutes is plenty for most sessions. On very heavy days or when testing, allow a little longer for the top warm-up sets.

Common warm-up mistakes

  • Too many reps in the warm-ups. Sets of 10 at 70% tire you out. Keep reps low as the weight climbs.
  • Big jumps straight to the work weight. Going from 60% to 100% makes the first work set feel crushing. Add a step at 80–90%.
  • Skipping the empty bar. It's the cheapest technique practice there is.
  • Long stretching sessions beforehand. Long static stretches right before heavy lifting aren't necessary; light mobility and warm-up sets do the job.
  • Rushing the last step. Take 2–3 minutes after your heaviest warm-up before your first working set.

Unsure how hard your sets should be once you're warm? Use the RPE chart to match effort to your plan.

Frequently asked questions

How many warm-up sets should I do before lifting heavy?

Usually 3 to 5 warm-up sets for your first heavy exercise, and 1 or 2 for later exercises. Very heavy singles or a max test may need 5 to 7 smaller steps.

What weight should my warm-up sets be?

Climb from the empty bar through about 40 to 50%, 60 to 65%, 75 to 80% and 85 to 90% of your first working-set weight, dropping the reps as the weight rises.

How many reps should warm-up sets be?

Start with 8 to 10 reps with the empty bar, then reduce: about 5 to 8, then 3 to 5, then 2 to 3, then a single before your working sets.

How long should I rest between warm-up sets?

Only as long as it takes to change the plates for the lighter sets, about 1 to 2 minutes in the middle, and 2 to 3 minutes after your heaviest warm-up.

How do I warm up for a 1RM test?

A common protocol is a light set of 5 to 10 reps at about 40 to 60% of your estimated max, a set of 3 to 5 reps, a near-maximal set of 2 to 3 reps, then single attempts with 2 to 4 minutes of rest between them.

Should warm-up sets feel easy?

Yes. Warm-up sets should feel smooth and fast. If a warm-up feels hard, it's a sign to make smaller jumps or lower your working weight for the day.

How long should a warm-up take before lifting?

About 10 to 15 minutes in total: 5 minutes of light cardio, a few minutes of mobility, then your warm-up sets.

Do I need to stretch before lifting?

Light mobility work and warm-up sets are enough for most people. Long static stretches right before heavy lifting aren't necessary.

References

  1. National Strength and Conditioning Association 1RM testing protocol, as summarised by the Human Performance Resources by CHAMP (HPRC).