Trap Bar vs Conventional Deadlift: Which Should You Do?

The trap bar (or hex bar) lets you stand inside the weight instead of behind it. That one change makes the deadlift easier to learn, shifts some of the work from your back to your legs and often lets you lift more. Here's how the two compare and how to choose.

Quick answerOn a trap bar you stand inside the frame and hold neutral handles, so the lift is more knee- and quad-dominant with less load on the lower back. Many lifters pull a bit more on it: in one study, powerlifters averaged 265 kg on the trap bar vs 245 kg on a straight bar, though another found no significant difference. The conventional deadlift trains the hips and back harder and is the competition lift. Beginners and athletes often do well with the trap bar; powerlifters need the straight bar.

Key differences

With a straight barbell, the weight sits in front of your shins, so your hips have to travel back and your torso leans forward to keep the bar over your mid-foot. A trap bar puts the weight on either side of you, in line with your body. You can sit a little lower, keep a more upright torso and push through your legs more.

Trap bar vs conventional deadliftHow the two deadlift styles compare. Columns: , Trap (hex) bar, Conventional. Bar position, Inside the frame, In front of shins | Grip, Neutral handles, Overhand / mixed | Main demand, More knees & quads, More hips & back | Lower-back moment, Lower, Higher | Learning curve, Easier, Harder | Best for, Athletes, beginners, Powerlifting, hingeTrap bar vs conventional deadliftHow the two deadlift styles compareTrap (hex) barConventionalBar positionInside the frameIn front of shinsGripNeutral handlesOverhand / mixedMain demandMore knees & quadsMore hips & backLower-back momentLowerHigherLearning curveEasierHarderBest forAthletes, beginnersPowerlifting, hingeBased on biomechanics research and general coaching practice.OneRepMax Calculator Lab
Standing inside the trap bar changes your position, the muscles that work hardest and how easy the lift is to learn.

What the research says

A biomechanical study by Swinton and colleagues had 19 male powerlifters deadlift with both bars. They lifted more on the hexagonal bar, an average of 265 kg compared with 245 kg on the straight bar, about 8% more. The trap bar also produced lower peak moments at the lower back, hips and ankles, a higher moment at the knees, and greater peak force, velocity and power at submaximal loads.

Trap bar vs straight bar: 1RMAverage one rep max of 19 male powerlifters (kg). Straight bar deadlift: 245 kg; Trap (hex) bar deadlift: 265 kgTrap bar vs straight bar: 1RMAverage one rep max of 19 male powerlifters (kg)Straight bar deadlift245 kgTrap (hex) bar deadlift265 kgSwinton et al. (2011); a 2016 study found no significant differenceOneRepMax Calculator Lab
In Swinton's study the trap bar 1RM was about 8% higher; a later study found no significant difference.

Not every study agrees on the strength difference. In a 2016 study of 20 men with deadlifting experience, there was no significant difference in 1RM between the two bars. So the honest summary is: the trap bar often lets you lift a little more, but not always, and the gap is usually modest.

Muscles worked

  • Both train the glutes, hamstrings, quads, spinal erectors, upper back and grip.
  • Trap bar: more quad and knee involvement because you sit lower with a more upright torso. It sits somewhere between a squat and a deadlift.
  • Conventional: more hip extension and lower-back demand, which is why it's such a strong builder of the posterior chain.

Which deadlift is better for you?

Goal or situationBetter choice
Powerlifting competitionConventional (or sumo)
Learning to deadliftTrap bar
Sport, jumping and powerTrap bar
Building the hips, hamstrings and backConventional
Lower back is sensitiveTrap bar (with care)
Long torso or limited hip mobilityTrap bar
Overall strength, no competition plansEither, or both

Converting between the two

There's no fixed ratio, but a reasonable starting point is that your trap bar max is 0–10% higher than your conventional deadlift, with about 5% a sensible middle guess. Use high handles and the gap can be bigger.

Conventional 1RMLikely trap bar 1RM (low handles)
100 kg / 225 lb100–110 kg / 225–245 lb
140 kg / 315 lb140–155 kg / 315–345 lb
180 kg / 405 lb180–200 kg / 405–445 lb
220 kg / 495 lb220–240 kg / 495–545 lb
Estimate either max from a recent set with the deadlift max calculator. Choose "Trap bar deadlift" so your numbers stay separate. For straight-bar numbers by bodyweight, see our deadlift standards.

High vs low handles

Most trap bars have two handle heights. The high handles shorten the range of motion by several centimetres, which makes the lift easier and usually heavier, and is handy for taller lifters or anyone with limited mobility. The low handles start the bar at roughly the same height as a straight bar with standard plates, so they're the fairer comparison with a conventional deadlift. Whichever you use, log it, and don't mix the two in your records.

Choosing a trap bar

  • Weight: trap bars vary, commonly about 20–30 kg (45–65 lb). Weigh yours or check the label so your numbers are accurate.
  • Handle heights: dual-height handles give you both options; note which you use.
  • Open vs closed frame: open-ended bars are easier to step into and can double for carries and lunges; closed hexagonal bars are more common and very stable.
  • Loading sleeves: longer sleeves matter if you'll get strong; short sleeves can limit how many plates fit.

Technique tips

Trap bar

  • Stand in the centre of the frame so the handles line up with the middle of your feet.
  • Sit down to the handles with a neutral spine and chest up, then push the floor away.
  • Don't turn it into a squat: your hips should still be above your knees at the start.

Conventional

  • Bar over mid-foot, about an inch from your shins.
  • Hinge to the bar, take the slack out and brace before you pull.
  • Keep the bar dragging up your legs and finish by driving your hips through.

Is the trap bar deadlift a squat or a deadlift?

A bit of both. It's still a hip hinge, because you pick a load up from the floor with your hips higher than your knees, but the upright torso and extra knee bend make it look and feel more like a squat than a conventional deadlift does. Research backs this up: knee demands go up and lower-back and hip demands go down. That's why many coaches use it as a lower-body strength exercise for athletes rather than as a pure deadlift substitute.

Common trap bar mistakes

  • Standing off-centre. If the handles aren't in line with your mid-foot, the bar tips forward or back.
  • Squatting it. Hips too low turns the lift into a quad-only squat and limits how much you can pull.
  • Rounding to reach low handles. If you can't reach the low handles with a neutral back, use the high handles.
  • Dropping the bar. A trap bar can bounce and twist; lower it under control.
  • Comparing with your straight-bar numbers. Track each separately.

A simple 4-week start for beginners

WeekSets × repsEffort
13 × 8Easy: 3–4 reps left in every set
23 × 8Add 5–10 kg; 3 reps left
34 × 6Add 5–10 kg; 2–3 reps left
44 × 5Add 5 kg; 2 reps left, then estimate your max

Rate the effort of each set with the RPE chart (2 reps left = RPE 8).

How to program both

  • Main lift + variation: conventional as the heavy lift (sets of 2–5) and trap bar as a lighter, faster day (sets of 3–6 at 65–75%), or the other way round if you're not a powerlifter.
  • Phase them: spend 4–8 weeks focusing on one, then switch.
  • For power: trap bar jumps or fast pulls at 30–50% of your trap bar max work well for athletes.

Plan loads for each with the 1RM percentage chart, and estimate each max separately.

Frequently asked questions

Is the trap bar deadlift easier than conventional?

Most people find it easier to learn and many can lift a little more on it, because the weight is in line with the body and the torso stays more upright. It is still a demanding exercise.

How much more can you lift on a trap bar?

Often 0 to 10% more. In one study, powerlifters averaged 265 kg on the trap bar versus 245 kg on a straight bar, but another study found no significant difference.

Is the trap bar deadlift better for your back?

Research found lower peak loading on the lower back with the trap bar. That can make it a good option for people with a sensitive back, though technique and sensible loading matter most.

Does the trap bar deadlift build the same muscles?

It works the same major muscles, with more emphasis on the quads and less on the hips and lower back than a conventional deadlift.

Should powerlifters use the trap bar?

As a variation, yes, but competition requires a straight bar, so powerlifters should keep conventional or sumo deadlifts as their main lift.

How much does a trap bar weigh?

Most trap bars weigh about 20 to 30 kg (45 to 65 lb), but it varies by model. Check the label or weigh it so your logged weights are accurate.

Do trap bar numbers count toward deadlift standards?

No. Deadlift standards are for the straight bar. Compare trap bar numbers only with other trap bar numbers.

References

  1. Swinton PA, Stewart A, Agouris I, Keogh JWL, Lloyd R. A biomechanical analysis of straight and hexagonal barbell deadlifts using submaximal loads. J Strength Cond Res. 2011;25(7):2000–2009.
  2. An examination of muscle activation and power characteristics while performing the deadlift exercise with straight and hexagonal barbells. J Strength Cond Res. 2016;30(5):1183–1188.