Incline to Flat Bench Ratio: How Much Should You Incline?

If you know your flat bench, how much should you expect to press on an incline, and the other way round? The ratio between the two is fairly consistent across lifters, and it can tell you a lot about where your pressing strength is strong or lagging.

Quick answerMost lifters incline about 77–83% of their flat bench, so 80% is a good rule of thumb: a 100 kg (225 lb) flat bencher can usually incline around 80 kg (180 lb). To go the other way, divide your incline by 0.8: an 80 kg incline suggests a flat bench of about 100 kg. Steeper benches (45° and above) push the ratio lower.

The incline to flat bench ratio

Two studies summarised by StrengthLog give a clear picture. Elite bench press athletes were 21.5% stronger on the flat bench than on a 25° incline. Trained young men with at least a year of experience were 28.6% stronger on the flat bench. Flip those numbers around and the incline lands at roughly 78–82% of the flat bench.

Incline to flat bench ratioIncline bench 1RM as a % of flat bench 1RM. Flat bench press: 100%; Elite bench athletes (25° incline): ≈ 82%; Trained young men: ≈ 78%; Typical range: ≈ 77–83%Incline to flat bench ratioIncline bench 1RM as a % of flat bench 1RMFlat bench press100%Elite bench athletes (25° incline)≈ 82%Trained young men≈ 78%Typical range≈ 77–83%Flat bench 21.5% (elite) and 28.6% (trained men) stronger than inclineOneRepMax Calculator Lab
Most lifters incline about four-fifths of their flat bench.

Why the gap? The incline shifts more of the work onto the front shoulders and the upper part of the chest, the bar usually travels further, and the line of pressing is less efficient for the big middle portion of the chest. None of that makes the incline a worse exercise; it's simply harder to load.

Flat to incline conversion

Use these tables to estimate a starting incline weight from your flat bench max.

Flat bench to incline benchEstimated incline 1RM from your flat bench 1RM (kg). Columns: Flat bench, At 75%, At 80% (typical), At 85%. 60 kg, 45 kg, 47.5 kg, 50 kg | 80 kg, 60 kg, 65 kg, 67.5 kg | 100 kg, 75 kg, 80 kg, 85 kg | 120 kg, 90 kg, 95 kg, 102.5 kg | 140 kg, 105 kg, 112.5 kg, 120 kg | 160 kg, 120 kg, 127.5 kg, 135 kgFlat bench to incline benchEstimated incline 1RM from your flat bench 1RM (kg)Flat benchAt 75%At 80% (typical)At 85%60 kg45 kg47.5 kg50 kg80 kg60 kg65 kg67.5 kg100 kg75 kg80 kg85 kg120 kg90 kg95 kg102.5 kg140 kg105 kg112.5 kg120 kg160 kg120 kg127.5 kg135 kgRatios assume a 30–45° incline with the same grip and pause style.OneRepMax Calculator Lab
Start your incline training around the 80% column and adjust after a session or two.
Flat bench 1RMIncline at 75%At 80% (typical)At 85%
135 lb100 lb110 lb115 lb
185 lb140 lb150 lb155 lb
225 lb170 lb180 lb190 lb
275 lb205 lb220 lb235 lb
315 lb235 lb250 lb270 lb
365 lb275 lb290 lb310 lb
Once you've done a real incline set, the incline bench press calculator estimates your actual incline 1RM for barbell, dumbbells or Smith machine.

Incline to flat conversion

Training mostly on the incline and wondering what you'd flat bench? Divide your incline by your ratio:

Incline 1RMFlat if ratio is 85%Flat at 80% (typical)Flat if ratio is 75%
50 kg60 kg62.5 kg67.5 kg
60 kg70 kg75 kg80 kg
70 kg82.5 kg87.5 kg92.5 kg
80 kg95 kg100 kg107.5 kg
90 kg105 kg112.5 kg120 kg
100 kg117.5 kg125 kg132.5 kg
120 kg140 kg150 kg160 kg

Expect your first flat sessions to land at the lower end if you haven't practised the flat bench in a while; technique comes back quickly. Confirm your flat number with the bench press calculator.

How bench angle changes the ratio

"Incline" isn't one setting, and the angle matters more than most people think. A study by Rodríguez-Ridao and colleagues measured muscle activity at five bench angles (0°, 15°, 30°, 45° and 60°) in 30 trained adults. Upper chest activity peaked at 30°, while angles above 45° shifted the work noticeably toward the front shoulders.

Bench angleMain emphasisEffect on the ratio
15°Whole chest, slight upper biasClose to flat, often 85–95%
30°Upper chest (peak activity)Around the typical 80%
45°Upper chest and front shouldersUsually a little below 80%
60°Mostly front shouldersWell below; closer to an overhead press

The 15° and 60° ratio figures are practical estimates rather than measured values. The lesson is simple: pick one angle, write it down and keep it fixed whenever you compare numbers.

What your ratio tells you

  • Below about 75%: your upper chest or shoulders may be lagging, or you rarely train the incline. Add incline work two or three times a week for a few weeks and the ratio usually climbs quickly.
  • 75–85%: balanced and typical.
  • Above about 85%: often a shallow incline, a big arch that flattens the angle, or a flat bench with room to grow. Check your angle first, then look at your flat bench technique.

For full incline numbers by bodyweight and experience, see our incline bench press standards.

How to fix a low incline ratio

If your incline sits well below 75% of your flat bench, a focused block usually closes the gap within six to eight weeks:

  • Put the incline first in one or two sessions a week so it gets your freshest effort.
  • Use 3–4 sets of 6–10 reps at about 70–80% of your incline max, adding weight when you hit the top of the range.
  • Add overhead pressing; check your numbers with the OHP max calculator.
  • Keep the flat bench in maintenance mode, one heavy session a week, so it doesn't drop while the incline catches up.

Using the ratio in your program

The ratio is handy when a program asks for incline work as a percentage of your flat bench. If your plan says "incline at 70% of your bench" and your flat max is 100 kg, start with about 70 kg, then adjust: if your own ratio is 75% rather than 80%, the same set will feel noticeably harder. Better still, estimate your incline max separately and plan from that with the 1RM percentage chart.

What about the Smith machine?

Smith machine incline numbers usually run a little higher than free-barbell incline numbers, because the fixed bar path removes the balance demand. Some Smith bars are also counterbalanced. Don't compare a Smith incline with a free-weight flat bench; keep each tool's numbers separate.

And the decline bench?

The decline bench goes the other way: the range of motion is shorter and the lower chest and triceps do more, so most lifters handle about the same as, or slightly more than, their flat bench. There's no widely agreed decline ratio, so treat it as roughly 100–105% of flat and confirm with your own sets.

Incline vs flat with dumbbells

The same rough ratio applies to dumbbells: most people press around 80% as much on an incline dumbbell press as on a flat dumbbell press, per dumbbell. Because dumbbell sizes jump in 2–2.5 kg (5 lb) steps, your real ratio may look a little lower or higher simply because of the available dumbbells. For converting dumbbell numbers to a barbell, use the dumbbell to barbell converter.

Frequently asked questions

What is the average incline to flat bench ratio?

Most lifters incline about 77 to 83% of their flat bench. Studies have found the flat bench 21.5% stronger than a 25° incline in elite bench athletes and 28.6% stronger in trained young men.

How much should I incline if I bench 225?

About 180 lb is typical (80% of 225). Anywhere from roughly 170 to 190 lb is within the normal range, depending on your bench angle and how often you train the incline.

How do I convert incline bench to flat bench?

Divide your incline 1RM by about 0.8. For example, an 80 kg incline suggests a flat bench of around 100 kg.

Why is my incline so much weaker than my flat bench?

The incline relies more on the front shoulders and upper chest, and the bar travels further. If your incline is below about 75% of your flat bench, extra incline and shoulder work usually closes the gap.

Does bench angle affect how much I can incline?

Yes. Lower angles feel closer to a flat bench and allow more weight; angles above 45 degrees shift the work to the shoulders and reduce the weight you can lift.

What percentage of my bench should I incline dumbbell press?

Per dumbbell, most people incline dumbbell press about 80% of what they flat dumbbell press. Compared with a barbell flat bench, each incline dumbbell is roughly a third of the barbell max.

Should I train incline or flat bench first?

Train whichever is your priority first. If your incline lags, putting it first for a few weeks is one of the quickest ways to improve your ratio.

Is it possible to incline more than you flat bench?

It's very unusual. If it happens, check that your incline isn't set very shallow and that your flat bench technique and practice aren't holding the flat number back.

References

  1. StrengthLog. 5 Differences Between Incline Bench Press vs Flat Bench Press (summary of flat vs incline 1RM studies).
  2. Rodríguez-Ridao D, Antequera-Vique JA, Martín-Fuentes I, Muyor JM. Effect of five bench inclinations on the electromyographic activity of the pectoralis major, anterior deltoid, and triceps brachii during the bench press exercise. Int J Environ Res Public Health. 2020;17(19):7339.