RPE Chart: RPE to Percentage Chart for Lifting

An RPE chart links how hard a set felt to how heavy it was compared with your max. Once you can read one, you can turn any set into an estimated one rep max and pick the right weight for your next set, even on days when you feel stronger or weaker than usual.

Quick answerOn the standard RPE chart, 5 reps at RPE 8 = 81.1% of your 1RM, 3 reps at RPE 9 = 89.2% and 1 rep at RPE 10 = 100%. RPE describes effort on a 1–10 scale; RIR (reps in reserve) is 10 minus RPE, so RPE 8 means you had about two reps left.

The RPE to percentage chart

The chart most lifters use comes from powerlifting coach Mike Tuchscherer of Reactive Training Systems (RTS). Each cell is the percentage of your one rep max (1RM) that a set of a given number of reps, at a given RPE, represents.

RPE chart: % of 1RMFind your reps (row) and RPE (column). Columns: Reps, RPE 10, RPE 9, RPE 8, RPE 7. 1 rep, 100.0%, 95.5%, 92.2%, 89.2% | 2 reps, 95.5%, 92.2%, 89.2%, 86.3% | 3 reps, 92.2%, 89.2%, 86.3%, 83.7% | 4 reps, 89.2%, 86.3%, 83.7%, 81.1% | 5 reps, 86.3%, 83.7%, 81.1%, 78.6% | 6 reps, 83.7%, 81.1%, 78.6%, 76.2% | 7 reps, 81.1%, 78.6%, 76.2%, 73.9% | 8 reps, 78.6%, 76.2%, 73.9%, 70.7% | 9 reps, 76.2%, 73.9%, 70.7%, 68.0% | 10 reps, 73.9%, 70.7%, 68.0%, 65.3%RPE chart: % of 1RMFind your reps (row) and RPE (column)RepsRPE 10RPE 9RPE 8RPE 71 rep100.0%95.5%92.2%89.2%2 reps95.5%92.2%89.2%86.3%3 reps92.2%89.2%86.3%83.7%4 reps89.2%86.3%83.7%81.1%5 reps86.3%83.7%81.1%78.6%6 reps83.7%81.1%78.6%76.2%7 reps81.1%78.6%76.2%73.9%8 reps78.6%76.2%73.9%70.7%9 reps76.2%73.9%70.7%68.0%10 reps73.9%70.7%68.0%65.3%Standard RTS (Tuchscherer) RPE chart. Half-point RPEs are in the full table below.OneRepMax Calculator Lab
The RPE chart for whole-number RPEs and 1–10 reps. RPE 8 is highlighted because it's the most common working-set effort.

Here is the full chart, including half-point RPEs and sets of up to 12 reps:

RepsRPE 10RPE 9.5RPE 9RPE 8.5RPE 8RPE 7.5RPE 7RPE 6.5
1100.0%97.8%95.5%93.9%92.2%90.7%89.2%87.8%
295.5%93.9%92.2%90.7%89.2%87.8%86.3%85.0%
392.2%90.7%89.2%87.8%86.3%85.0%83.7%82.4%
489.2%87.8%86.3%85.0%83.7%82.4%81.1%79.9%
586.3%85.0%83.7%82.4%81.1%79.9%78.6%77.4%
683.7%82.4%81.1%79.9%78.6%77.4%76.2%75.1%
781.1%79.9%78.6%77.4%76.2%75.1%73.9%72.3%
878.6%77.4%76.2%75.1%73.9%72.3%70.7%69.4%
976.2%75.1%73.9%72.3%70.7%69.4%68.0%66.7%
1073.9%72.3%70.7%69.4%68.0%66.7%65.3%64.0%
1170.7%69.4%68.0%66.7%65.3%64.0%62.6%61.3%
1268.0%66.7%65.3%64.0%62.6%61.3%59.9%58.6%

How to read the chart

Find the row for the number of reps you did and the column for the RPE you rated the set. The cell is the percentage of your max you lifted.

Example 1, estimate your max: you squat 140 kg for 5 reps at RPE 8. The chart says 81.1%. Divide: 140 ÷ 0.811 = 172.6 kg estimated 1RM.

Example 2, choose a weight: next week you want 3 reps at RPE 9 (89.2%). Multiply: 172.6 × 0.892 = 154 kg, so load 155 kg.

Notice the diagonal pattern. Every step to the right (half a point less RPE) or down (one more rep) costs roughly the same percentage. That's why 3 reps at RPE 9 and 4 reps at RPE 10 share the same value: both sets finish with the same total "reps possible".

Same 5 reps, different effort% of 1RM for a set of 5 at each RPE (reps in reserve). RPE 10 (0 RIR): 86.3%; RPE 9.5 (0–1 RIR): 85.0%; RPE 9 (1 RIR): 83.7%; RPE 8.5 (1–2 RIR): 82.4%; RPE 8 (2 RIR): 81.1%; RPE 7.5 (2–3 RIR): 79.9%; RPE 7 (3 RIR): 78.6%; RPE 6.5 (3–4 RIR): 77.4%Same 5 reps, different effort% of 1RM for a set of 5 at each RPE (reps in reserve)RPE 10 (0 RIR)86.3%RPE 9.5 (0–1 RIR)85.0%RPE 9 (1 RIR)83.7%RPE 8.5 (1–2 RIR)82.4%RPE 8 (2 RIR)81.1%RPE 7.5 (2–3 RIR)79.9%RPE 7 (3 RIR)78.6%RPE 6.5 (3–4 RIR)77.4%Each half-point of RPE ≈ one more rep in reserve ≈ 1.2–1.6% of 1RMOneRepMax Calculator Lab
Rating a set of 5 just half a point differently changes the estimated percentage by about 1.3%.
Don't want to do the maths? The RPE calculator takes your weight, reps and RPE, estimates your 1RM and gives you the weight for your next set.

The RPE scale explained

In lifting, RPE (rating of perceived exertion) is a 1–10 scale based on how many more reps you could have done. Most training happens between RPE 6 and 10:

RPEReps in reserveWhat it feels like
100Max effort: no more reps, no more weight
9.50–1No more reps, maybe a little more weight
91One more rep possible
8.51–2Definitely one more, maybe two
82Two more reps possible
7.52–3Two, maybe three more
73Three more; bar moving fast
6.53–4Three to four more; warm-up feel

Below RPE 6 the scale is rarely used for strength work, because it's hard to tell the difference between "five reps left" and "eight reps left".

RPE vs RIR: what's the difference?

RIR stands for reps in reserve: how many more good reps you could have done when you racked the bar. RPE and RIR describe the same thing from opposite ends:

RIR = 10 − RPE, and RPE = 10 − RIR. An RPE 8 set has 2 reps in reserve; an RPE 9 set has 1.

The reps-in-reserve version of the RPE scale was described for resistance training by Zourdos and colleagues in 2016. In practice:

  • RIR is easier to learn. "Stop with two reps left" is a concrete instruction, so many coaches start beginners with RIR.
  • RPE is handier for heavy singles and doubles, where "reps left" is hard to judge. RPE 9.5 ("no more reps, but maybe a bit more weight") has no neat RIR equivalent.
  • They are interchangeable on the chart. If your program says "5 reps @ 2 RIR", look up 5 reps at RPE 8.

How to use the RPE chart in training

1. Estimate your max from every hard set

Every top set you rate becomes a fresh 1RM estimate, so you never need to test a true max to keep your numbers current. Sets at RPE 7–9 give the most reliable estimates.

2. Autoregulate your working weights

Instead of fixed percentages, programs written with RPE say things like "3 × 5 @ RPE 8". On a good day you'll handle a little more weight at RPE 8; on a bad day a little less. The effort stays right while the load adapts to you.

3. Work up to a top set, then back off

A popular structure: work up to one heavy set (for example 1 rep at RPE 8), then drop the weight for "back-off" sets of 3–5 reps. Use the chart to set the back-off weight from your top set.

Top single at RPE 8 = 92.2% → 100 kg, so your estimated max is about 108.5 kg. Back-off sets of 5 at RPE 7 = 78.6% → about 85 kg.

4. Plan with percentages when you prefer

If you like fixed numbers for a training block, turn your estimated max into a full table with the 1RM percentage chart, then use RPE as a check that the weights still feel right.

A sample RPE-based week

DayMain liftSets × reps @ RPE
MondaySquatWork up to 1 × 3 @ 8, then 3 × 5 @ 7
WednesdayBench pressWork up to 1 × 1 @ 8, then 4 × 4 @ 7.5
FridayDeadliftWork up to 1 × 2 @ 8, then 2 × 4 @ 7

Log the weight and RPE of every top set. Over a few weeks, the estimated maxes from those sets show whether you're getting stronger, without a single max-out session.

Limitations of the RPE chart

  • Rating takes practice. Beginners often underrate effort and think a set was RPE 7 when it was really RPE 9. Filming sets and checking bar speed helps.
  • Percentages are averages. Some lifters can grind out more reps at a given percentage than the chart suggests, especially on squats and deadlifts. After a few weeks of logging, you may notice your own numbers run a little high or low.
  • High reps are less precise. The chart is most accurate for sets of 1–8 reps.
  • It isn't a licence to grind. Most training should finish at RPE 7–9. True RPE 10 sets are tiring and best saved for occasional tests.

Frequently asked questions

What is an RPE chart?

An RPE chart is a table that converts reps and rating of perceived exertion into a percentage of your one rep max. The version most lifters use was created by Mike Tuchscherer of Reactive Training Systems.

What percentage is RPE 8?

It depends on the reps. On the standard chart, RPE 8 is 92.2% for a single, 86.3% for a triple, 81.1% for 5 reps and 76.2% for 7 reps.

What is the difference between RPE and RIR?

RIR is reps in reserve, the number of extra reps you could have done. RPE is 10 minus RIR, so an RPE 8 set has 2 reps in reserve.

How do I calculate my 1RM from RPE?

Look up the percentage for your reps and RPE on the chart, then divide the weight by that percentage. For example, 140 kg for 5 reps at RPE 8 (81.1%) gives an estimated 1RM of about 172.6 kg.

Is RPE accurate?

It becomes accurate with practice. Beginners often underestimate how hard a set was, so start by using RPE 7 to 8 and compare your ratings with video or bar speed.

What RPE should most of my sets be?

Most working sets are best kept between RPE 7 and 9. That's hard enough to drive progress without the fatigue of training to failure every set.

What does RPE 9.5 mean?

You could not have done another rep, but you might have managed slightly more weight for the same reps. It sits between RPE 9 (one rep left) and RPE 10 (nothing left).

References

  1. Zourdos MC, Klemp A, Dolan C, et al. Novel resistance training–specific rating of perceived exertion scale measuring repetitions in reserve. J Strength Cond Res. 2016;30(1):267–275.
  2. RTS / Tuchscherer RPE chart values, as reproduced by Fitness Volt.