The incline bench is the lift people most often wonder about, because almost everyone is weaker on it than on the flat bench and nobody is sure by how much. This guide gives you incline barbell and incline dumbbell standards by bodyweight, explains how they were built, and shows how to read your own numbers.
Incline barbell bench press standards
These are estimated one rep max figures for adult male lifters on a barbell incline bench set to roughly 30–45 degrees.
In pounds, rounded to the nearest 5 lb:
| Bodyweight | Beginner | Intermediate | Advanced | Elite |
|---|---|---|---|---|
| 130 lb | 60 lb | 105 lb | 145 lb | 180 lb |
| 150 lb | 70 lb | 120 lb | 170 lb | 210 lb |
| 170 lb | 80 lb | 135 lb | 190 lb | 240 lb |
| 190 lb | 90 lb | 150 lb | 215 lb | 265 lb |
| 210 lb | 100 lb | 170 lb | 235 lb | 295 lb |
| 230 lb | 110 lb | 185 lb | 260 lb | 320 lb |
| 250 lb | 120 lb | 200 lb | 280 lb | 350 lb |
Incline bench standards for women
Women's upper-body pressing numbers are lower relative to bodyweight, as on the flat bench. Using the same 65% scaling as our bench press standards:
| Bodyweight | Beginner | Intermediate | Advanced | Elite |
|---|---|---|---|---|
| 50 kg | 15 kg | 25 kg | 37.5 kg | 45 kg |
| 60 kg | 17.5 kg | 30 kg | 42.5 kg | 55 kg |
| 70 kg | 22.5 kg | 37.5 kg | 50 kg | 62.5 kg |
| 80 kg | 25 kg | 42.5 kg | 57.5 kg | 72.5 kg |
| 90 kg | 27.5 kg | 47.5 kg | 65 kg | 82.5 kg |
For a 60 kg woman at the intermediate level, that's an incline bench of about 30 kg, or roughly 12–14 kg per dumbbell on the incline dumbbell press.
Incline dumbbell press standards
For the incline dumbbell press, the figures below are the estimated one rep max per dumbbell.
| Bodyweight | Beginner | Intermediate | Advanced | Elite |
|---|---|---|---|---|
| 60 kg | 12 kg | 20 kg | 28 kg | 34 kg |
| 70 kg | 14 kg | 24 kg | 32 kg | 40 kg |
| 80 kg | 16 kg | 26 kg | 38 kg | 46 kg |
| 90 kg | 18 kg | 30 kg | 42 kg | 52 kg |
| 100 kg | 20 kg | 34 kg | 46 kg | 58 kg |
| 110 kg | 22 kg | 36 kg | 52 kg | 64 kg |
| Bodyweight | Beginner | Intermediate | Advanced | Elite |
|---|---|---|---|---|
| 130 lb | 25 lb | 45 lb | 60 lb | 75 lb |
| 150 lb | 30 lb | 50 lb | 70 lb | 85 lb |
| 170 lb | 35 lb | 55 lb | 80 lb | 100 lb |
| 190 lb | 40 lb | 65 lb | 90 lb | 110 lb |
| 210 lb | 40 lb | 70 lb | 100 lb | 120 lb |
| 230 lb | 45 lb | 75 lb | 105 lb | 135 lb |
| 250 lb | 50 lb | 85 lb | 115 lb | 145 lb |
For working sets of 8–12 reps, expect to use about 70–80% of these numbers.
How these standards were built
- Flat bench markers. We started from bodyweight multiples coaches commonly use for the flat bench press in adult men: about 0.6× bodyweight for a beginner, 1× intermediate, 1.4× advanced and 1.75× elite.
- Incline adjustment. Published studies put the flat bench about 21–29% ahead of the incline, which means the incline sits at roughly 78–82% of flat. We used 80%.
- Dumbbell adjustment. For dumbbells, we applied the roughly 17% gap between barbell and dumbbell 1RM found by Saeterbakken and colleagues, then split the result between two hands.
The starting markers are broad coaching guides rather than a database of incline lifts, so treat these as sensible estimates. The method is the same one used in our average dumbbell bench press guide, so the numbers line up across both.
Incline vs flat in one line
Most lifters incline roughly 77–83% of their flat bench. For conversion tables in both directions and what your own ratio says about your pressing, see our incline to flat bench ratio guide.
Bench angle changes everything
An "incline bench" can mean anything from 15° to 60°, and the angle has a big effect on how much you can lift:
- 15–30°: close to a flat bench; you'll handle the most weight. Around 30° is enough to shift extra work to the upper chest.
- 30–45°: the most common gym setting and the one these standards assume.
- 45° and steeper: increasingly shoulder-dominant; expect noticeably lower numbers as the press starts to resemble an overhead press.
Always compare your incline numbers at the same angle. A 10° change between sessions can easily look like a 5–10% change in strength.
What is a good incline bench weight?
For most men who train regularly, these milestones are worth aiming for on a 30–45° barbell incline:
| Milestone | Incline bench (1RM) | Typical flat bench at that point |
|---|---|---|
| First real milestone | 60 kg / 135 lb | About 75 kg / 165 lb |
| Strong regular lifter | 80 kg / 185 lb | About 100 kg / 230 lb |
| Very strong | 100 kg / 225 lb | About 125 kg / 280 lb |
The flat bench figures assume the typical 80% ratio. If you want to see where your own flat bench sits, use the bench press calculator.
Common incline bench mistakes
- Arching the incline away. A huge lower-back arch on a 45° bench can turn it into something close to a flat bench. A moderate arch is fine; keep your hips on the seat.
- Touching too low. Lowering the bar to mid-chest on an incline puts the shoulders in an awkward position. Aim just below the collarbones.
- Changing the angle every session. Pick one setting, note it, and keep it for at least a training block so your numbers stay comparable.
- Treating the incline like a max-out lift. It responds best to steady volume. Save heavy singles for the flat bench.
A simple incline progression
If your incline lags, try this for six weeks, once or twice a week, after estimating your incline max with the incline calculator:
| Weeks | Sets × reps | Load |
|---|---|---|
| 1–2 | 4 × 10 | About 65% of your incline max |
| 3–4 | 4 × 8 | About 72% of your incline max |
| 5–6 | 5 × 5 | About 80% of your incline max |
At the end, re-estimate your max from a hard set and start the cycle again with the new number.
How to improve your incline bench
- Train it with intent, not as an afterthought. Put the incline first in some sessions so it gets your best effort.
- Keep your shoulder blades back and down and touch the bar just below your collarbones.
- Use 6–12 rep sets most of the time, with occasional heavier sets of 3–5. Plan the loads with the 1RM percentage chart.
- Build the shoulders with overhead pressing; check your numbers with the overhead press calculator.
- Mix barbell and dumbbells across your training weeks to cover both raw strength and balance between arms.
Frequently asked questions
What is a good incline bench press weight?
For an adult man around 80 kg (176 lb), about 65 kg (140 lb) for one rep is a solid intermediate incline bench. A 1RM of 80 kg (185 lb) is strong for a regular lifter.
What is the average incline bench press?
Most men who train regularly incline somewhere around 0.8 times their bodyweight for one rep, which fits the intermediate level in the tables above. Beginners are usually closer to half their bodyweight.
What are good incline dumbbell press standards?
For an 80 kg (176 lb) man, an estimated one rep max of about 26 to 28 kg (60 lb) per dumbbell is a good intermediate incline dumbbell press.
What is a good incline bench for a woman?
For an intermediate woman, an incline bench of about half her bodyweight for one rep is a solid level, around 30 kg for a 60 kg woman.
What angle should an incline bench be?
Most people use 30 to 45 degrees. Around 30 degrees already shifts extra work to the upper chest; steeper angles turn the press increasingly into a shoulder exercise.
Why is my incline bench so weak?
Usually because the incline relies more on the front shoulders and upper chest than the flat bench does. If your incline is well below 75% of your flat bench, extra shoulder pressing and more incline volume often help.
References
- StrengthLog. 5 Differences Between Incline Bench Press vs Flat Bench Press (summary of flat vs incline 1RM studies).
- Saeterbakken AH, van den Tillaar R, Fimland MS. A comparison of muscle activity and 1-RM strength of three chest-press exercises with different stability requirements. Journal of Sports Sciences. 2011.